专业词汇|金属材料词语d

冷辘钢片在没表面处置状况下的焊接情况

Spot welding conditions for bared Cold rolled mild steel sheets
时间效应及拉伸应变
Aging Stretcher Strains
日工标准冷辘钢片化学成份
Chemical composition cold rolled steel sheet to JIS G3141
冷辘钢片的理论重量计算方程式
Cold Rolled Steel Sheet Theoretical mass
日工标准冷辘钢片重量列表
Mass of Cold-Rolled Steel Sheet to JIS G3141
冷辘钢片订货须知
Ordering of cold rolled steel strip/sheet
其它日工标准冷轧钢片
JIS standard application of other cold Rolled Special Steel
电镀锌钢片或电解钢片
Electro-galvanized Steel Sheet/Electrolytic Zinc^{1 Coated Steel Sheet
介绍
General
电解/电镀锌大大增强钢片的防锈能力
Galvanic Action improving Weather Corrosion2 Resistance of the base Steel Sheet
上漆能力 Paint Adhesion
电镀锌钢片的焊接
Welding of Electro-galvanized steel sheet
点焊
Spot welding
滚焊
Seam welding
电镀锌钢片
Electro-galvanized Steel Sheet
生产步骤
Production Flow Chart
常见的镀锌钢片的基层金属、作用与功效、日工标准、美材标准及一般厚度
base metal, application, JIS ASTM standard, and Normal thickness of galvanized steel sheet
锌镀层水平 Zinc Coating Mass
表面处置 Surface Treatment
冷轧钢片 Cold-Rolled Steel Sheet/Strip
热轧钢片 Hot-Rolled Sheet/Strip
电解冷轧钢片厚度公差
Thickness Tolerance3 of Electrolytic Cold-rolled sheet
热轧钢片厚度公差
Thickness Tolerance of Hot-rolled sheet
冷轧或热轧钢片阔度公差
Width Tolerance of Cold or Hot-rolled sheet
长度公差 Length Tolerance
理论水平 Theoretical Mass
锌镀层水平
Mass Calculation of coating /MM
锌镀层水平
Mass Calculation of coating /MM
镀锡薄铁片
介绍
General
镀锡薄铁片的架构
Construction of Electrolytic Tinplate
镀锡薄钢片制造过程
Production Process of Electrolytic Tinplate
锡层水平
Mass of Tin Coating
两面均等锡层
Both Side Equally Coated Mass
两面不均等锡层
Both Side Different Thickness Coated Mass
级别、电镀办法、镀层水平及常用称号
Grade, Plating type, Designation of Coating Mass Common Coating Mass
镀层水平标记
Markings Designations of Differential Coatings
硬度 Hardness
单相轧压镀锡薄铁片
Single-Reduced Tinplate
双相辗压镀锡薄钢片
Dual-Reduction Tinplate
钢的类型 Type of Steel
表面处置 Surface Finish
常用尺寸 Commonly Used Size
电器用硅 [硅] 钢片 Electrical Steel Sheet
介绍 General
软磁材料 Soft Magnetic Material
滞后回线 Narrow Hystersis
矫顽磁力 Coercive Force
硬磁材料 Hard Magnetic Material
最大能量积 Maximum Energy Product
硅含量对电器用的低碳钢片的最大好处
The Advantage of Using Silicon4 low Carbon Steel
晶粒取向及非晶粒取向
Grain Oriented Non-Oriented
电器用硅 [硅] 钢片的最后作用与功效及规格
End Usage and Designations of Electrical Steel Strip
电器用的硅 [硅] 钢片之分类
Classification of Silicon Steel Sheet for Electrical Use
电器用钢片的绝缘涂层
Performance of Surface Insulation5 of Electrical Steel Sheets
晶粒取向电器用硅钢片主要工业标准
International Standard Grain-Oriented Electrical Steel Silicon Steel Sheet for Electrical Use
晶粒取向电器用硅钢片 Grain-Oriented Electrical Steel
晶粒取向，定取向芯钢片及高硼定取向芯钢片之磁力性能及夹层系数}

Magnetic Properties and Lamination Factor of SI-ORIENT-CORE SI-ORIENT-CORE-HI B Electrical Steel Strip
退火Annealing
电器用钢片用家需自行应力退火缘由
Annealing of the Electrical Steel Sheet
退火时需要注意的地方 Annealing Precautionary
碳污染 Prevent Carbon Contamination
热力应先从工件边缘透入
Heat from the Laminated Stacks Edges
防备过份氧化
No Excessive Oxidation
应力退火温度
Stress relieving Annealing Temperature
晶粒取向电器用硅 [硅] 钢片 高硼定取向芯钢片及定取向芯钢片之机械性能及夹层系数

Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B and SI-ORIENT-CORE Grain Orient Electrical Steel Sheets
晶粒取向电器用硅 [硅] 钢;片 高硼低硫定取向 钢片之磁力及电力性能

Magnetic and Electrical Properties of SI-ORIENT-CORE-HI-B-LS
晶粒取向电器用硅 [硅] 钢片 高硼低硫 定取向钢片之机械性能及夹层系数

Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B-LS
晶粒取向电器用硅钢片-高硼定取向 芯钢片，定取向芯钢片及高硼低硫定取向芯钢片之厚度及阔度公差

Physical Tolerance of SI-ORIENT-CORE-HI-B, SI-ORIENT-CORE, SI-CORE-HI-B-LS Grain
Oriented Electrical Steel Sheets
晶粒取向电器用硅钢片 高硼定取向 芯钢片，定取向芯钢片及高硼低硫定取向芯钢片之标准尺寸及包装

Standard Forms and Size of SI-ORIENT-CORE-HI-B,SI-CORE, SI-ORIENT-CORE-HI-B-LS Grain-
Oriented Electrical Steel Sheets
绝缘表面 Surface Insulation
非晶粒取向电力用钢片的电力、磁力、机械性能 及夹层系数

Lamination Factors of Electrical, Magnetic Mechanical Non-Grain Oriented Electrical
电器及家用电器外壳用镀层冷辘 [低碳] 钢片
Coated Steel Sheets for Casing,Electricals Home Appliances
镀铝硅钢片 Aluminized Silicon Alloy^{6 Steel Sheet
介绍 General
镀铝硅合金钢片的特点
Feature of Aluminized Silicon Alloy Steel Sheet
作用与功效
End Usages
抗化学品能力
Chemical Resistance
镀铝钢片 日工标准
Hot-aluminum7-coated sheets and coils to JIS G 3314
镀铝钢片 美材试标准35.7 JIS G3314镀热浸铝片的机械性能}

Mechanical Properties of JIS G 3314 Hot-Dip Aluminum-coated Sheets and Coils
公差 Size Tolerance
镀铝钢片及其它类型钢片的抗腐蚀性能比较
Comparsion of various resistance of aluminized steel other kinds of steel
镀铝钢片生产步骤
Aluminum Steel Sheet, Production Flow Chart
焊接能力 Weldability
镀铝钢片的焊接状况
Tips on welding of Aluminized sheet in comparasion with cold rolled steel strip
钢板
Steel Plate
钢板作用与功效分类及各国钢板的工业标准包含日工标准及美材试标准
Type of steel Plate Related JIS, ASTM and Other Major Industrial Standards
钢板生产步骤
Production Flow Chart
钢板订货须知
Ordering of Steel Plate
不锈钢
Stainless^{8 Steel
不锈钢的概念 Definition of Stainless Steel
不锈钢之分类，耐腐蚀性及耐热性
Classification, Corrosion Resistant9 Heat Resistance of Stainless Steel
铁铬系不锈钢片
Chrome Stainless Steel
马氏体不锈钢
Martensite Stainless Steel
低碳马氏体不锈钢
Low Carbon Martensite Stainless Steel
含铁体不锈钢
Ferrite Stainless Steel
镍铬系不锈钢
Nickel Chrome Stainless Steel
释出硬化不锈钢
Precipitation Hardening Stainless Steel
铁锰铝不锈钢
Fe / Mn / Al / Stainless Steel
不锈钢的磁性
Magnetic Property Stainless Steel
不锈钢箔、卷片、片及板之厚度分类
Classification of Foil, Strip, Sheet Plate by Thickness
表面保护胶纸
Surface protection film
不锈钢片材常用代号
Designation of SUS Steel Special Use Stainless
表面处置 Surface finish
薄卷片及薄片机械性能
Mechanical Properties of Thin Stainless Steel strip/sheet
不锈钢片机械性能
Mechanical Properties of Spring use Stainless Steel
不锈钢 类型，工业标准，化学成份，特征及 主要作用与功效}

Stainless Steel Type, Industrial Standard, Chemical Composition, Characteristic end usage of the most commonly used Stainless Steel
不锈钢薄片作用与功效例
End Usage of Thinner Gauge^{10
不锈钢片、板作用与功效例
Examples of End Usages of Strip, Sheet Plate
不锈钢应力退火卷片常用规格名词图形解析
General Specification11 of Tension Annealed Stainless Steel Strips
耐热不锈钢
Heat-Resistance Stainless Steel
镍铬系耐热不锈钢特质、化学成份、及操作温度
Heat-Resistance Stainless Steel
铬系耐热钢
Chrome Heat Resistance Steel
镍铬耐热钢
Ni - Cr Heat Resistance Steel
超耐热钢
Special Heat Resistance Steel
抗热超级合金
Heat Resistance Super Alloy
耐热不锈钢比重表
Specific Gravity of Heat resistance steel plates and sheets stainless steel
不锈钢材及耐热钢材标准对照表
Stainless and Heat-Resisting Steels
发条片 Power Spring Strip
发条的分类及材料
Power Spring Strip Classification and Materials
上链发条 Wind-up Spring
倒后擦发条 Pull Back Power Spring
圆面发条 Convex Spring Strip
拉尺发条 Measure Tape
魔术手环 Magic Tape
魔术手环尺寸图Drawing of Magic Tap
定型发条 Constant Torque Spring
定型发条及上炼发条的驱动力
Spring Force of Constant Torque Spring and Wing-up Spring
定型发条的形状及翻动过程
Shape and Spring Back of Constant Torque Spring
定型发条驱动力公式及代号
The Formula and Symbol of Constant Torque Spring
边缘处置 Edge Finish
硬度 Hardness
高碳钢化学成份及作用与功效
High Carbon Tool Steel, Chemical Composition and Usage
每公斤发条的长度浅易公式
The Length of 1 Kg of Spring Steel Strip
SK-5 人工智能SI-301 每公斤长的重量/公斤 Weight per one meter long
SK-5 人工智能SI-301 每公斤之长度 Length per one kg
SK-5 人工智能SI-301 每公尺长的重量/公斤
Weight per one meter long
SK-5 人工智能SI-301 每公斤之长度
Length per one kg
高碳钢片 High Carbon Steel Strip
分类
Classification
用组织结构分类
Classification According to Grain Structure
用含碳量分类 即低碳钢、中碳钢及高碳钢
Classification According to Carbon Contains
弹簧用碳钢片
CarbonSteel Strip For Spring Use
冷轧状况 Cold Rolled Strip
回火状况 Annealed Strip
淬火及回火状况
Hardened Tempered Strip/ Precision Quenched Steel Strip
贝氏体钢片 Bainite Steel Strip
弹簧用碳钢片材之边缘处置 Edge Finished
淬火剂
Quenching Media
碳钢回火 Tempering
回火有低温回火及高温回火
Low High Temperature Tempering
高温回火
High Temperature Tempering
退火 Annealing
完全退火 Full Annealing
扩散退火 Diffusion Annealing
低温退火 Low Temperature Annealing
中途退火 Process Annealing
球化退火 Spheroidizing Annealing
光辉退火 Bright Annealing
淬火 Quenching
时间淬火 Time Quenching
奥氏铁孻回火 Austempering
马氏铁体淬火 Marquenching
高碳钢片作用与功效 End Usage of High Carbon Steel Strip
冷轧高碳钢 日本工业标准
Cold-Rolled Carbon Steel Strip to JIS G3311
电镀金属钢片 Plate metal Strip
介绍 General
电镀金属捆片的优点
Advantage of Using Plate metal Strip
金属捆片电镀层
Plated Layer of Plated metal Strip
镀镍 Nickel Plated
镀铬 Chrome Plated
镀黄铜 Brass Plated
基层金属 base metal of Plated metal Strip
低碳钢或铁基层金属
Iron Low Carbon as base metal
不锈钢基层金属 Stainless Steel as base metal
铜基层金属
Copper as base metal
黄铜基层金属
Brass as base metal
轴承合金 Bearing Alloy
介绍
General
轴承合金 日工标准 JIS H 5401
Bearing Alloy to JIS H 5401
锡基、铅基及锌基轴承合金比较表
Comparison of Tin base, Lead base and Zinc base alloy for Bearing purpose
易溶合金 Fusible Alloy
焊接合金 Soldering and Brazing Alloy
软焊 Soldering Alloy
软焊合金 日本标准 JIS H 4341
Soldering Alloy to JIS H 4341
硬焊 Brazing Alloy
其它焊接材料请参阅日工标准目录
Other Soldering Material
细线材、枝材、棒材
Chapter Five Wire, Rod Bar
线材/枝材材质分类及制成品
Classification and End Products of Wire/Rod
铁线日工标准 JIS G 3532}